Chery Tiggo 7 Pro Rear Caliper (RH, Part No.: 204000474AA)

First of all, let's be straightforward: The rear caliper (RH) 204000474AA of the Chery Ggo 7 Pro is not merely a "metal clamp" - it is the "right rear brake engine" of your car. You can imagine it as a precise device installed on the right rear brake disc, working together with the brake pads to slow down or stop your Tiger 7 Pro. When you step on the brake pedal, hydraulic oil flows into the caliper, pushing the piston inside it to squeeze the brake pads and the rotating disc. This friction converts the movement of the wheels into heat, allowing your car to stop smoothly and safely. Without it, your right rear wheel will lose most of the braking power, resulting in uneven stops, pulling to one side, and even brake failure.

This caliper is specially designed for the right rear (RH = right hand) of the Chery Ggo 7 Pro model - please be sure to confirm with your car's VIN or user manual! Its design is perfectly matched with the rear braking system of the Tiger 7 Pro: the size of the piston is consistent with the car's hydraulic system (no weak or excessive braking), its installation point is suitable for the rear axle bracket (no drilling or forcing), and its sealing design is compatible with the brake fluid of the Tiger 7 Pro (no leakage). Universal caliper? You will run into trouble: it will clamp unevenly (causing brake vibration), leak fluid (losing pressure), or wear out the gasket quickly (wasting money) - turning every stop into a risk.

1. Core Work: Why can calipers ensure your safety

Its role in braking safety is beyond doubt - it does three key things for your Tiger 7 Pro:

Provide targeted braking power: It applies precise pressure to the right rear brake pad to ensure braking balance between the front and rear wheels (preventing rear wheels from locking up or the car from steering).

Maintain braking consistency: It keeps the brake pads in proper contact with the discs (without loose movement), so the stop feeling remains smooth - no spongy pedals or sudden grasping.

Prevent fluid loss: Its tight seal traps the hydraulic fluid inside, maintaining the braking pressure. Even a small leak from a defective caliper can make the brake pedal feel soft and reduce the stop power.

• Fits These Models: All Chery Tiggo 7 Pro variants (matches the rear brake disc size and hydraulic system—confirm via VIN).

• Won’t Fit These:

• Left rear (LH) side of Tiggo 7 Pro: Left rear calipers have reversed mounting points—this RH caliper won’t attach.

• Other Chery models (e.g., Tiggo 8 Pro, Arrizo 9): Their rear brake discs and axle brackets differ—no alignment or hydraulic match.

• Non-Chery vehicles: Even if it “looks similar,” the piston size and fluid line connections are wrong—causes brake imbalance.

 Installation & Maintenance (Pros Only—Safety First!)

Installation: Certified Chery Technicians Required

1. Prep the rear wheel: They remove the right rear wheel, old caliper, and worn brake pads (if needed).

2. Install and bleed: They mount 204000474AA to the axle bracket, connect the brake fluid line, and “bleed” the system (remove air bubbles—air causes spongy brakes).

3. Test brakes: They press the pedal repeatedly to build pressure, then test drive to check for even stopping and no leaks.

Maintenance: Keep It Working for Years

• Check for leaks monthly: Look for wet brake fluid around the caliper (leaks mean failing seals—fix immediately).

• Inspect dust boots yearly: If boots are cracked or missing, replace them (dirt will ruin the piston).

• Clean during pad replacement: When changing rear brake pads, wipe the caliper and piston with brake cleaner (removes brake dust buildup—prevents sticking).

Summary: Chery Tiggo 7 Pro Rear Caliper (RH, 204000474AA)

Contact us