Chery FX Middle Rear Fog Lamp (Part No.: 605000616AA)
First, let’s keep it simple: the
Chery FX Middle Rear Fog Lamp 605000616AA isn’t just a “small rear light”—it’s your FX’s “rear safety beacon” for bad weather. Think of it as a bright, focused light mounted in the middle of the
rear bumper that cuts through fog, heavy rain, or thick snow. It makes your FX more visible to cars behind you (even when regular
tail lights get lost in the haze), so you’re less likely to get rear-ended. Without it, driving in low-visibility conditions gets way riskier—other drivers might not spot your car until it’s too late.
This fog lamp is exclusive to Chery FX models—always check your car’s VIN or owner’s manual to confirm! It’s built to fit the FX’s rear bumper perfectly: its size lines up with the bumper’s middle cutout (no gaps or overhangs), the mounting brackets match the FX’s bumper frame (no drilling), and the wiring plug connects straight to the car’s rear light harness (no messy wire-splicing). Grab a generic fog lamp? You’ll run into headaches: it’ll be too dim (won’t cut through fog), won’t fit the bumper cutout (looks ugly), or stops working after a few weeks (cheap bulbs burn out fast). Total hassle for a part that keeps you safe.
Don’t underestimate its role—it does 3 critical things for your FX’s rear visibility:
Cuts through bad weather: Its bright, concentrated beam pierces fog, rain, or snow way better than regular tail lights. When the air is thick, other drivers can spot this lamp from farther away, giving them more time to slow down.
Adds visibility in low light: Even on dark, clear nights (like country roads with no streetlights), it adds an extra bright spot at the rear—helping drivers behind judge your distance and speed.
Meets safety rules: In many regions, rear fog lamps are required by law for driving in fog or heavy rain. This original lamp follows those standards—no risk of getting pulled over for an unapproved, dim generic one.
![605000616AA]( "605000616AA")
This 605000616AA fog lamp is only for Chery FX models—using the wrong one wastes money and risks safety:
If you’re comfortable with basic wiring, you can install it in 20 minutes; if not, a mechanic can do it fast:
Access the bumper: Remove the small panel inside the FX’s trunk (behind the rear bumper) to reach the lamp’s mounting area.
Mount the lamp: Screw 605000616AA into the bumper’s middle cutout using the factory brackets.
Connect the wire: Plug the lamp’s connector into the FX’s rear light harness—test it by flipping the fog lamp switch (should turn on instantly).
Clean the lens monthly: Wipe the lamp’s housing with a damp cloth to remove dirt, bugs, or road salt (grime dims the light).
Check the bulb yearly: If the lamp stops working, replace the bulb with an original Chery one (generic bulbs don’t match the brightness).
Inspect the wiring: Every few months, check the plug for corrosion (white/green buildup)—clean it with a dry brush to avoid short circuits.
![605000616AA]( "605000616AA")
Exclusive to Chery FX (confirm via VIN, fits halogen/LED trims), this lamp is the FX’s “rear weather safety beacon”: it emits a bright, focused beam to cut through fog/rain/snow, boosting visibility for rear drivers to avoid collisions and meeting legal standards for bad weather.
Made with a long-life bulb, waterproof plastic housing (prevents short circuits), direct-wire plug (no wire-splicing), and bumper-matching trim (sleek fit), it aligns perfectly with the rear bumper’s middle cutout. Install DIY (20 mins) or via pros; maintain by cleaning the lens and checking bulbs/wiring. Aftermarket lamps are dim, unwaterproof, or illegal—only the original ensures safety.
Contact us
![605000616AA]( "605000616AA")
