602002017AA
Product Details
Chery FX Left Rear Bumper Upper Part (Part No.: 602002017AA)
First, let’s keep it straightforward: the Chery FX Rear Bumper Upper Part LH 602002017AA isn’t just a “plastic panel”—it’s the “left-side protector and style keeper” for your FX’s rear end. Think of it as the upper half of your left rear bumper: it shields the car’s left rear body (like the tailgate edge and rear quarter panel) from small bumps, keeps the rear end looking neat, and lines up perfectly with other parts (like the left taillight and lower bumper). Without it, your FX’s rear left side would be exposed to scratches, dents, or dirt—and the whole back end would look uneven.
This part is exclusive to Chery FX models—always check your car’s VIN or owner’s manual to confirm! It’s engineered to fit the FX’s rear end like a glove: its shape matches the car’s original body lines (no weird gaps or overhangs), the mounting holes align exactly with the FX’s rear chassis (no drilling or modifying), and it has pre-cut slots for the left taillight and rear reflector (so those parts fit right back on). Grab a generic one? You’ll run into headaches: it’ll sit crookedly (ruins the rear look), crack easily (cheap plastic can’t take minor hits), or block the taillight (risking traffic tickets). Total hassle for a part that keeps your FX safe and sleek.
Core Jobs: Why This Part Matters for Your FX
Don’t write it off as just “cosmetic”—it does 3 key jobs:
Shields the rear left body: It takes the brunt of small impacts (like backing into a shopping cart or light scrapes in a parking lot) to protect the FX’s metal body panels underneath. This avoids costly dents or rust on the car’s frame.
Keeps the rear looking factory-fresh: It matches the FX’s original paint texture and body curves. If your old bumper part is cracked or faded, replacing it with 602002017AA makes the rear end look like new again.
Holds other rear parts in place: It has built-in mounting spots for the left taillight, rear reflector, and even the rear bumper’s lower section. Without it, those parts might wiggle loose or sit unevenly.
This 602002017AA part is only for Chery FX models—using the wrong one wastes money:
Fits These Models: All Chery FX variants (confirm via VIN to match your car’s rear end design—no trim differences affect fit).
Won’t Fit These:
Other Chery models (e.g., Tiggo 5, Arrizo 8): Their rear bumpers have different shapes/sizes—this part won’t align.
Non-Chery vehicles: Even if it “looks close,” the mounting holes and body curves are wrong—installing it will ruin your car’s rear look.
Installation & Maintenance (Easy—But Align Carefully!)
Installation: DIY-Friendly (With a Friend’s Help!)
You can install it in 30 minutes—just need a screwdriver and a helper (to hold the panel while you attach it):
Remove the old part: Unscrew the bolts/clips holding the damaged left rear bumper upper part to the chassis. Pull it off gently (it may stick a little from dirt).
Clean the area: Wipe the FX’s rear left frame with a damp cloth to remove dust (so the new part attaches tightly).
Install the new part: Line up 602002017AA with the mounting holes, attach the screws/clips, and press the taillight/reflector back into its slot. Check for gaps—adjust if needed.
Maintenance: Keep It Looking Good
Wash it with the car: Clean the bumper part when you wash your FX—dirt buildup can make it look faded.
Check for cracks: If you hit something, inspect for small cracks (fix them with plastic repair glue to stop them from spreading).
Touch up paint (if needed): The original part comes unpainted or painted to match the FX’s color—if it chips, use matching touch-up paint to prevent fading.
Summary: Chery FX Engine Cover (151000032AA)
Contact us
Leave your messages
