BESTUNE B30 Front HeadLamp Right – Part No.: 3711025FG
Think of this as your BESTUNE B30’s “right eye” for the road—not just a light, but a safety-focused lighting unit that helps you see and be seen at night or in bad weather. It’s a tough, weather-sealed assembly with a clear polycarbonate lens (scratch-resistant), a reflective housing (directs light evenly), LED or halogen bulbs (for bright illumination), and built-in mounting brackets. This right front headlamp sits on the front-right corner of the B30, matching the left headlamp to create balanced, far-reaching light. Without it, your right-side visibility drops drastically—making turns, lane changes, or driving on dark roads risky. This headlamp is exclusive to BESTUNE B30—always check your vehicle’s VIN to confirm fitment! BESTUNE designed it to match the B30 perfectly: its size and shape align with the front bumper and grille (no gaps or odd looks), its light beam pattern meets road safety standards (doesn’t blind oncoming drivers), and its wiring plug connects directly to the B30’s electrical system (no messy adapters). Grab a generic headlamp or one for other models? You’ll run into issues: wrong beam angle (poor visibility), bad fit (ruins the B30’s front look), or incompatible wiring (won’t turn on or flickers).
Core Jobs: Light the Road, Signal Others & Withstand Weather
As a key safety part of the B30, it does three vital jobs to keep you safe:
Illuminate the right side: At night or in fog/rain, it casts a bright, focused beam on the right side of the road—helping you spot pedestrians, potholes, or road signs you might miss otherwise. The reflective housing shapes the light so it reaches far but stays low (no dazzling other drivers).
Work with other lights: It integrates with the B30’s turn signals and daytime running lights (DRLs, if equipped). When you flip the right turn signal, the bulb inside the headlamp flashes; DRLs keep the headlamp dimly lit during the day to make your B30 more visible to other cars.
Resist weather damage: The sealed lens and housing keep rain, snow, dust, and moisture out. No water getting inside means no foggy lens or shorted bulbs—so it works reliably even in heavy rain or snow.
![3711025FG]( "3711025FG")
This 3711025FG right front headlamp only works for the BESTUNE B30—if you try putting it on the wrong car, you’ll either have trouble seeing the road or the front of your B30 will look all lopsided.
What it fits: Every version of the BESTUNE B30. It lines up with the B30’s front frame, matches its electrical system, and has the right light beam pattern—just double-check your vehicle’s VIN to be sure.
What it won’t fit:
Other BESTUNE models, like the B50, T77, or T99. Those cars have different-sized front ends, use different bulbs, or have wiring that doesn’t match—so the headlamp either won’t attach or won’t turn on.
Cars from other brands. Even if it looks similar, their electrical setups and where parts mount are different. Slapping this on could even mess up your B30’s wiring if you’re not careful.
B30s with modified front ends. If you put an aftermarket bumper or grille on your B30, the front opening size changes—and the original headlamp won’t fit right. You’ll end up with gaps or the light might get blocked.
You don’t need a pro to swap out this headlamp—here’s how to do it step by step:
Get ready: Turn off your B30’s engine and disconnect the battery (so you don’t get shocked). Pop the hood open, then find the back of the right headlamp—it’s behind the front bumper.
Take out the old headlamp: First, unplug the wiring plug from the back of the old headlamp. Then use a socket wrench to take out the 2 or 3 bolts that hold the headlamp’s brackets to the car’s frame. Gently pull the old headlamp forward to take it out—don’t yank too hard, you might break something.
Put in the new headlamp: Slide the 3711025FG into the front opening. Line up the brackets with the holes on the frame, then tighten the bolts back up. Plug the wiring back in—you’ll hear a click when it’s secure.
Test it out: Reconnect the battery, then turn on the headlights and the right turn signal. Make sure the light is bright, the beam points straight (not up into the sky or down at the ground), and the turn signal flashes like it should. If the beam’s off, most headlamps have a small screw you can turn to adjust the height.
Clean the lens every week: Wipe the front of the headlamp with a damp cloth and some mild soap. Bugs, dirt, or road salt build up on it, and that can dim the light by 30% or more—you don’t want that at night.
Check the bulb every 6 months: Turn on the headlights and look at the right one. If it’s dimmer than usual or flickers, the bulb’s going bad—replace it fast. A dead bulb means you won’t have light on the right side at night, which is super risky.
Look for water inside: If the lens gets foggy from the inside, that means the seal’s broken. Water’s getting in, and that’ll ruin the bulb and the headlamp itself—you’ll need to replace the whole headlamp.
Tighten the bolts once a year: Make sure the bolts holding the headlamp are tight. If they’re loose, the headlamp will wiggle around when you drive (it’ll rattle) or shift position—and then the beam won’t point where it should.
![3711025FG]( "3711025FG")
As the "right eye" of BESTUNE B30, this headlamp is a weather-sealed assembly with a scratch-resistant polycarbonate lens, reflective housing, LED/halogen bulb, and mounting brackets. Mounted on the front-right corner, it boosts visibility and safety at night or in bad weather, exclusive to B30 (confirm via VIN).
Key roles: Illuminate the right road (avoids dazzling others); integrate with turn signals/DRLs; resist water/dust.
It fits all B30 variants but not other BESTUNE models (e.g., B50, T77), non-BESTUNE vehicles, or B30 with modified front ends.
Installation is DIY-friendly: Disconnect battery, remove old headlamp, install 3711025FG, test. Maintenance: Clean lens weekly, check bulb every 6 months, inspect for internal water, tighten bolts yearly.
Original headlamps ensure brightness, proper fit, and durability—aftermarket ones risk dim light, bad beam patterns, or leaks.
![3711025FG]( "3711025FG")
Contact us
![3711025FG]( "3711025FG")
