First, let’s keep it simple: the Chery FX Left Front Daytime Running Light (DRL) 605000555AA isn’t just a “small daytime light”—it’s your FX’s “left-side visibility booster” for safe driving. Think of it as a bright, always-on signal that makes your car stand out to pedestrians, cyclists, and other drivers during the day—even in fog, rain, or bright sun. Without it, your FX is easier to miss in busy traffic, raising the risk of minor collisions or near-misses.
This DRL is
exclusively for Chery FX models (always double-check your car’s VIN or owner’s manual to confirm—some FX trims have LED vs. halogen DRLs!). It’s engineered to fit the FX’s front-end perfectly: the shape lines up with the bumper and left
headlamp (no weird gaps), the mounting clips lock into the front chassis seamlessly, and the wiring plug connects straight to the FX’s existing light harness—no cutting or splicing needed. Grab a generic DRL? You’ll run into headaches: dim light (hardly visible), misfit (sits crookedly), or quick burnout (fails in months)—total hassle for a part that keeps you safe.
Don’t underestimate its role—it does 2 key things to protect your drives:
Boosts daytime visibility: It turns on automatically when you start the FX (no need to flip a switch) and stays bright enough to catch attention. On cloudy days or in stop-and-go traffic, it helps other road users spot your car early—especially if they’re distracted.
Complements other lights: Many FX trims pair this DRL with the left turn signal (it dims or blinks with the signal), making your turns even clearer to drivers behind or beside you. It never interferes with night lights (it shuts off or dims when you turn on headlights).
![605000555AA]( "605000555AA")
This 605000555AA DRL is only for Chery FX models—using the wrong one wastes money and risks safety:
Fits These Models: Chery FX (all trims; confirm via VIN to match LED/halogen variants).
Won’t Fit These:
Other Chery models (e.g., Tiggo 7, Arrizo 6): Their front-end shapes and wiring are different—this DRL won’t align or work.
Non-Chery vehicles: Even if it “looks similar,” the mounting and plug are wrong—you’ll damage the wiring trying to install it.
Light System Compatibility: Works with the FX’s original headlight and turn signal system (no conflict with other lights). Aftermarket light kits may not pair with it—stick to factory parts.
You only need a screwdriver—here’s how:
Access the DRL: Open the FX’s hood, find the small panel behind the left front DRL (snaps off).
Unplug the old DRL: Pull the wiring plug from the back (it clicks—give a firm tug).
Remove the old DRL: Unscrew 1–2 bolts holding it to the bumper, then pull it out.
Install the new one: Slide 605000555AA in, screw it back, plug in the wiring, and snap the panel shut. Start the car—check if the DRL turns on (it should light up automatically).
Clean the lens monthly: Wipe with a damp cloth to remove bugs/dirt (grime dims the light).
Check for leaks: If the DRL flickers or dies, check for water inside—replace the gasket if needed.
Replace bulbs (if halogen): If it dims, swap the bulb (LEDs rarely need replacing).
![605000555AA]( "605000555AA")
Exclusive to Chery FX models (confirm via VIN for LED/halogen fit), the 605000555AA DRL boosts daytime safety—it turns on automatically, making the FX visible to pedestrians/drivers in fog, rain, or sun. Some trims let it pair with the left turn signal (dims/blinks) for clearer cues.
It fits the front-end perfectly (aligns with bumper/headlamp), plugs directly into the wiring (no mods), and has a weather-sealed housing (water/dust-proof). DIY-installable in 10 minutes (screwdriver needed). Maintain by monthly lens cleaning and checking for leaks; halogen variants need bulb swaps if dim. Aftermarket DRLs are dim/leaky—original ensures durability and safety.
Contact us
![605000555AA]( "605000555AA")
