First, let’s keep it simple: the
Chery Tiggo 7 Pro Rear Tail Lamp (Inner Right) 605000204AA isn’t just a “back light”—it’s your right rear’s “safety signal hub.” Think of it as a precision-built, weatherproof light assembly mounted on the
inner right side of the
Tiggo 7 Pro’s rear (closer to the trunk, not the outer fender). Its main job? To send clear signals to cars behind you—showing when you’re braking, turning right, or driving at night—so other drivers can react safely. Without it, you risk rear-end collisions or miscommunication on the road.
This inner right rear tail lamp is
exclusively designed for Chery Tiggo 7 Pro models—always confirm with your car’s VIN or owner’s manual! It’s engineered to fit perfectly: its shape matches the rear body’s inner contour (no gaps), its wiring harness syncs with the car’s electrical system (no short circuits), and its light output meets Chery’s safety standards (bright enough to be seen in daylight or rain). A generic tail lamp? You’ll face issues: it’ll be dim (hard to spot), miswired (signals work incorrectly), or leak water (ruins the bulb fast)—putting your safety at risk.
Its role is all about “visibility and communication”—it does 4 critical things for your Tiggo 7 Pro:
Braking signal: When you hit the brakes, its bright red brake light turns on—warning cars behind to slow down (prevents rear-end crashes).
Right turn signal: Flashes amber when you flip the right turn lever—telling drivers you’re changing lanes or turning right (avoids side collisions).
Nighttime visibility: Its low-brightness red “parking light” stays on at night—helping other drivers see your car’s width and position (even when parked or driving slowly).
Weather resilience: It works reliably in rain, snow, or fog—thanks to its sealed design—so signals never cut out when you need them most.
![605000204AA]( "605000204AA")
This 605000204AA tail lamp is only for the inner right rear of Chery Tiggo 7 Pro models—wrong fit = useless signals:
You or a technician can install it in 15–20 minutes:
Access the old lamp: Open the trunk, remove the small plastic panel behind the inner right tail lamp (reveals the wiring and mounting clips).
Disconnect and remove: Unplug the old lamp’s wiring harness, then pop out the clips (or unscrew) to take out the old unit.
Install the new lamp: Line up 605000204AA with the mounting points, push it into place (clips click), then plug in the wiring.
Test signals: Turn on the car, check brake, turn, and parking lights—ensure all work correctly (no dim or unlit functions).
Check bulbs monthly: If a signal (e.g., right turn) stops working, replace the bulb immediately (dim bulbs are hard to see).
Clean the lens weekly: Wipe the outer lens with a damp cloth (remove dirt, bugs, or road salt—buildup dims the light).
Inspect for leaks: After heavy rain, check the trunk panel behind the lamp for moisture (leaks mean the housing is cracked—replace the lamp to avoid short circuits).
![605000204AA]( "605000204AA")
Exclusive to Chery Tiggo 7 Pro’s inner right rear (confirm via VIN), this lamp is a “safety signal hub”: it emits brake (red), right turn (amber), and parking (dim red) lights to alert rear drivers, ensuring visibility in rain/fog/night.
It has a sealed waterproof plastic housing (prevents short circuits), plug-and-play wiring, and secure clips/screws. DIY installation is feasible; maintain by checking bulbs, cleaning lenses, and inspecting for leaks. Aftermarket lamps are dim, leaky, or miswired—only the original ensures signal clarity and safety.
Contact us
![605000204AA]( "605000204AA")
