Let’s get straight to it—this isn’t just a “small light” on your Tiggo7 Pro’s mirror. It’s the
left-hand (LH) side mirror’s “integrated signal & auxiliary lighting unit”: a compact, weatherproof lamp assembly designed exclusively to fit the left
rearview mirror of the Chery Tiggo7 Pro. Made of durable ABS plastic housing and high-brightness LED bulbs, it’s seamlessly embedded in the mirror’s outer shell. Its core role? Serve as a turn signal to alert other drivers of your lane changes, and often provide auxiliary lighting (like puddle lights for the ground below when unlocking the car) to enhance safety and convenience. Without it, your vehicle’s side turn signal visibility drops, and you lose the practical auxiliary lighting function.
This left mirror lamp is tailored for Chery Tiggo7 Pro’s left rearview mirror—always confirm your vehicle’s VIN to ensure a perfect match! It’s engineered to fit the mirror’s design: its shape aligns with the mirror housing (no gaps or protrusions), its wiring connector syncs with the Tiggo7 Pro’s electrical system (supports signal and lighting functions), and its brightness meets Chery’s safety standards (ensures visibility in day/night). Opt for a generic lamp? You’ll face issues: mismatched size (can’t fit the mirror housing), dim light (poor visibility), or wiring incompatibility (frequent malfunctions).
It’s a dual-functional part that boosts driving safety and convenience—here are 2 key roles for your Tiggo7 Pro:
Side turn signal: When you activate the left turn signal, the lamp flashes brightly to alert vehicles/pedestrians on the left side of your intended movement. This fills the blind spot of front/rear turn signals, reducing collision risks during lane changes or turns.
Auxiliary lighting (puddle light): Many variants feature a downward-facing light that turns on when unlocking the car or opening the door. It illuminates the ground near the left front door, helping you avoid stepping on puddles, debris, or obstacles at night
![601000527AA]( "601000527AA")
This 601000527AA mirror lamp only fits the left rearview mirror of Chery Tiggo7 Pro—if it’s the wrong fit, it just won’t work properly.
All versions of Chery Tiggo7 Pro. It matches the left mirror’s housing size, wiring specs, and mounting structure—make sure to check your VIN to confirm it’s the
right one.
The right rearview mirror of Tiggo7 Pro: It’s a mirror-image design, so the mounting tabs and wiring positions are flipped—you can’t install it at all.
Other Chery models: Like Tiggo8 Pro or Arrizo 8. Their mirror housings and electrical systems are different—this lamp just won’t work with them.
Non-Chery cars: Even if it looks similar, the mirror size and wiring harnesses are totally different—it won’t function properly even if you force it on.
Changing this lamp means taking apart the mirror and dealing with electrical wiring—if you try to DIY, you might damage the mirror. Here’s how the pros do it:
Take the mirror apart: Techs either unbolt the left rearview mirror from the door or take the mirror housing apart to reach the old lamp.
Remove the old lamp: They disconnect the electrical plug, release the mounting clips, and pull out the old lamp.
Install the new lamp: They fit the 601000527AA into the mirror’s groove, clip it securely in place, then plug the electrical connector back in.
Test if it works: They check if the turn signal flashes normally and if the puddle light (if equipped) works, making sure there’s no short circuit or dimness.
Clean the lens often: Wipe the clear lens with a soft cloth to get rid of dirt and dust—dirty lenses make the light less visible.
Check for water leakage: If the inside of the lamp gets foggy, that means water has seeped in. Replace the housing gasket or the whole lamp to avoid short circuits.
Test the turn signal monthly: Flip on the left turn signal to ensure the lamp flashes steadily. Flickering or no light usually means a wiring issue or a bad LED.
Avoid impacts: Don’t bump the mirror into objects—hitting it can crack the housing or damage the LED bulb inside.
![601000527AA]( "601000527AA")
Exclusive to Chery Tiggo7 Pro’s left rearview mirror (confirm VIN), this lamp functions as a left turn signal (enhancing lane-change safety) and auxiliary puddle light (illuminating the ground at night).
It won’t fit Tiggo7 Pro’s right mirror, other Chery models (e.g., Tiggo8 Pro), or non-Chery vehicles. Install by certified techs (involves mirror disassembly/wiring); maintain by cleaning the lens, checking for water ingress, and testing the turn signal monthly. Only the original ensures proper fit and safety.
Contact us
![601000527AA]( "601000527AA")
