202000470AA

Brand: Chery

Model: Tiggo7 Pro

Product Name：Front Control Arm LH

Part Number: 202000470AA

Contact Now WhatsApp

Product Details

Chery Tiggo7 Pro Front Control Arm (Left-Hand) – Part No.: 202000470AA

Let’s keep it straightforward—this isn’t just a “metal bar” under your Tiggo7 Pro’s left front wheel. It’s the key load-bearing and steering link in the front suspension system: a durable, precision-forged component made of high-strength steel (or reinforced aluminum alloy for lighter models). Mounted between the left front chassis frame and the wheel hub assembly, it works with ball joints and bushings to connect the car’s body to the wheel. Think of it as the “left front wheel’s ‘bridge’ to the frame”: without it, the wheel can’t stay aligned, the steering becomes loose, and every bump in the road would jolt the entire cabin.

This left-hand (LH) front control arm is exclusive to Chery Tiggo7 Pro—always check your vehicle’s VIN to confirm fitment! It’s tailored to the Tiggo7 Pro’s specs: its length and angle match the front suspension geometry (ensures accurate wheel alignment), its mounting points align with the chassis and hub (no forced adjustments), and its load capacity handles the Tiggo7 Pro’s weight and road impacts (avoids bending or breaking). Grab a generic control arm instead? You’ll run into trouble: wrong length (causes uneven tire wear), weak material (bends on rough roads), or mismatched bushings (creates loud rattles).

1. Core Jobs: Stabilize Wheels, Enable Steering & Absorb Bumps

As a critical part of the Tiggo7 Pro’s front suspension, it does three key jobs that keep driving safe and smooth:

Maintain wheel alignment: It holds the left front wheel in its correct vertical and horizontal angles (toe, camber). This ensures the tire stays flat on the road, preventing uneven wear and keeping the Tiggo7 Pro from pulling to one side.

Transfer steering force: When you turn the steering wheel, the control arm (via the ball joint) translates that movement to the left front wheel. This lets you steer precisely—no lag or looseness, even at high speeds.

Absorb road impacts: The rubber bushings on the control arm soften jolts from potholes, speed bumps, or rough pavement. This stops harsh vibrations from reaching the cabin, making rides smoother for you and your passengers.

This 202000470AA LH front control arm only fits Chery Tiggo7 Pro—wrong fit means unsafe handling:

Fits These: All Chery Tiggo7 Pro variants (matches front suspension geometry, chassis mounting points, and wheel hub specs—confirm with VIN).

Won’t Fit These:

Other Chery models: Like Tiggo8 Pro, Tiggo7 (non-Pro), or Arrizo 8—different suspension designs and control arm lengths (causes alignment issues).

Non-Chery vehicles: Even if similar in shape, chassis and hub bolt patterns differ (can’t install or work safely).

Tiggo7 Pro with modified suspension: Aftermarket lift kits or lowered suspension need custom control arms—original ones can’t adapt (ruins alignment).

Installation & Upkeep (Pros Only—Safety First!)

Installation: Must Be Done by Certified Technicians

Swapping this control arm isn’t DIY—misalignment risks accidents:

Prep: Techs lift the Tiggo7 Pro safely, remove the left front wheel, then disconnect the ball joint from the hub and the bushings from the chassis.

Remove old arm: They unbolt the worn control arm, inspect the hub and chassis mounting points for rust or damage (repair if needed).

Install new arm: They attach 202000470AA to the chassis (torque bolts to Chery’s specs) and connect the ball joint to the hub—then perform a four-wheel alignment (critical for steering and tire wear).

Test: They reinstall the wheel, lower the car, and test drive to check for smooth steering, no pulling, and no abnormal noises (e.g., squeaks from loose bushings).

Maintenance: Easy Checks to Keep It Safe

Inspect bushings/ball joint: Every 40,000km, have techs check for cracked bushings (causes rattles) or loose ball joints (feels like loose steering). Replace immediately if damaged.

Check for bending: If you hit a large pothole or curb, inspect the control arm for visible bends—even small bends ruin alignment (causes uneven tire wear).

Listen for warnings: Squeaking when turning, pulling to the right (since LH arm is worn), or a “loose” steering feel—these mean the control arm needs inspection.

Summary: Chery Tiggo7 Pro Left-Hand Front Control Arm (202000470AA)

This is an exclusive LH front control arm for Chery Tiggo7 Pro (confirm VIN for fitment). Made of high-strength steel or reinforced aluminum alloy, it’s mounted between the left front chassis frame and wheel hub, working with ball joints and bushings.

Its core functions: Maintain left front wheel alignment (prevent uneven tire wear/pulling), transfer steering force for precise control, and absorb road bumps via rubber bushings (reduce cabin vibration).

It only fits Chery Tiggo7 Pro— incompatible with other Chery models (e.g., Tiggo8 Pro), non-Chery vehicles, or Tiggo7 Pro with modified suspension. Installation requires certified techs and four-wheel alignment. Maintenance includes 40,000km checks for cracked bushings/loose ball joints, and inspecting for bending after impacts.

Original parts are critical—aftermarket ones have weak materials, bad fits, or poor bushings, risking steering issues/tire damage. The original costs $60–120, avoiding costly later repairs.

202000470AA