First things first, let’s make it super easy: the Chery
Tiggo 7 Pro Cabin Filter 301001157AA isn’t just some “thin little filter”—it’s basically your car’s built-in “cabin air cleaner.” Picture it like a protective screen that cleans the air before it blows into your
Tiggo 7 Pro’s inside. Every time you crank up the AC or heater, this filter catches dirt, pollen, dust, even those tiny exhaust bits from outside—so you and whoever’s riding with you breathe fresh air instead of gross grime. It’s a small part, but man, it’s a game-changer if you have allergies, kids, or just hate that “musty old car air” smell.
This cabin filter’s only made for Chery Tiggo 7 Pro models—make sure to double-check your car’s VIN or owner’s manual to confirm (it works for most Tiggo 7 Pro variants from 2020 onward!). Chery designed it to fit the Tiggo 7 Pro’s HVAC (that’s heating, ventilation, AC) system like a glove: it’s the
right size for the filter spot behind the glove box, the edges seal up tight (so no unfiltered air sneaks through), and it’s set up to match how the car’s air flows—so your AC or heater still blows nice and strong, no wimpy airflow. Grab a cheap generic filter? You’ll end up with headaches: it’s either too big or too small (so it won’t fit), lets dirty air leak in (hello, allergy flare-ups), or clogs up fast (so your AC blows like it’s tired). Total letdown for a part that’s supposed to make your drive nicer.
![301001157AA]( "301001157AA")
This 301001157AA cabin filter only works with Chery Tiggo 7 Pro—using the wrong one is a waste of money and defeats the purpose:
Fits These Models: Chery Tiggo 7 Pro (most 2020+ variants, all trims—including those with auto AC or climate control).
Won’t Fit These:
Other Tiggo models (e.g., Tiggo 8, Tiggo 5x): Their filter housings are smaller/bigger—this one won’t slide in.
Other Chery cars (e.g., Arrizo 6 Pro, QQ): Different HVAC systems mean different filter sizes—no match.
Non-Chery vehicles: Even if it “looks similar,” the shape and size are off—you’ll have to force it (ruining the housing) or it’ll leak air.
System Compatibility: Works with the Tiggo 7 Pro’s original filter housing and AC system—no modifications needed. It’s also safe for cars with pollen filters or “air quality” modes (won’t interfere with those features).
Replacing this filter is one of the easiest DIY jobs on your Tiggo 7 Pro—all you need is your hands (no tools!). Here’s how:
Open the glove box: Empty it first, then squeeze the sides of the glove box (they’ll flex) to release the stops—let it hang down gently.
Find the filter housing: Behind the glove box, you’ll see a small plastic door (usually labeled “Filter” or with a filter icon). Push the tabs on the door to open it.
Remove the old filter: Pull the old filter straight out—note which way it’s facing (there’s an “Air Flow” arrow; the new one goes in the same direction!).
Insert the new one: Slide the 301001157AA filter into the housing, matching the arrow to the airflow direction. Close the plastic door until it clicks.
Reset the glove box: Push it back up until it locks into place. Done!
![301001157AA]( "301001157AA")
The Chery Tiggo 7 Pro Cabin Filter 301001157AA works as the car’s in-cabin air purifier. It traps dust, pollen, PM2.5, and exhaust particles from AC/heater air, keeping the cabin fresh—ideal for allergy sufferers or anyone who hates musty car smells.
Fitting 2020+ Tiggo 7 Pro models (confirm via VIN/owner’s manual), it aligns perfectly with the HVAC system: right size for the glove-box housing, tight seals (no unfiltered air), and no reduced airflow. Aftermarket filters often misfit or clog fast; the original lasts 6–12 months (replace, don’t wash) and protects the AC system.
Contact us
![301001157AA]( "301001157AA")
