Product Introduction:

 Haima S7 Right Rear Window Regulator (Part No.: SA00-72-560M1-C)

1. Product Overview

2. Core Components & Working Principle

Key Components

• High-Torque Motor: Powers the lifting system, handling window weight even in low temperatures.

• Precision Gear Reducer: Slows speed, boosts torque, and locks the window to prevent sliding.

• Cable-Pulley Transmission: Single-rail design with anti-rust steel cables and smooth pulleys for efficient power transfer.

• Reinforced Glass Bracket: Holds glass tightly to keep alignment during movement.

• OE Electrical Connector: Plugs directly into the original wiring harness (no extra wiring).

Working Principle

3. Structural & Material Advantages

• Single-Rail Design: Fewer parts, less weight, no jamming/shifting; reduces friction for longer life.

• Wear-Resistant Parts: Anti-rust cables and low-friction pulleys cut noise and ensure efficient power transfer.

• Tough Housing/Brackets: Made of high-strength engineering plastics and stamped steel; resists vibration and -40°C to 80°C temperature changes without warping.

4. Performance Features

• Smooth & Quiet: Low noise during operation for better in-car comfort.

• Efficient Power: Strong lifting force with low energy use; window moves at 10-15 mm/s.

• Durable: Motor handles 10,000+ lift/lower cycles; cables resist fatigue.

• Safe: Self-locking gear prevents unintended movement; structure withstands minor impacts.

5. Application & Installation

Applicable Vehicles

Installation Tips

1. Disconnect the car battery first (avoids short circuits).

2. Use professional tools to remove the right rear door panel gently (no trim/wiring damage).

3. Remove the old regulator, align SA00-72-560M1-C with original holes, secure with bolts, and plug in the connector.

4. Reconnect the battery, test window movement (smooth, proper stopping, no odd noise), then reinstall the door panel.

Haima S7 Right Rear Window Regulator (Part No.: SA00-72-560M1-C) – Key Features

1. OE-Standard Fit for Haima ModelsSA00-72-560M1-C is made specifically for Haima S7 (2010-2017) and S3 sedans, matching the original part’s door structure, electrical port, and weight capacity perfectly—1:1. No need to modify anything; it’s a direct, hassle-free swap for the factory regulator.
2. Reliable Core ComponentsSA00-72-560M1-C has high-performance parts to keep it running steady: a strong-torque motor (handles the window’s weight even when it’s cold), a self-locking gear reducer (stops the window from sliding down on its own), and anti-rust cable-pulley setup (makes sure power gets transferred smoothly).
3. Sturdy Structure & Durable Materials

• Single-rail design: Less jamming or shifting, cuts down friction, and makes SA00-72-560M1-C last longer.

• Housing and brackets: Made of tough engineering plastics plus stamped steel. They can handle temps from -40°C to 80°C and vibrations without warping.

• Wear-resistant cables and low-friction pulleys: No rust, and they keep the noise down when the window moves.

4. Smooth, Efficient & Quiet PerformanceIt runs almost silently, thanks to precision-cut gears and the cable-pulley setup. The window goes up and down at a steady 10-15 mm per second, and it doesn’t use much power. The motor can handle over 10,000 lift/lower cycles, so SA00-72-560M1-C is reliable for the long haul.
5. Safety-Centric DesignThe self-locking gear keeps the window from moving when it shouldn’t. Plus, the tough structure can take small impacts without breaking—protecting both passengers and the window system.
6. Easy Plug-and-Play InstallationIt comes with an OE-matching electrical connector that plugs right into the car’s original wiring. It also lines up with the factory mounting holes perfectly. No extra wiring or tool tweaks needed—even if you’re a DIYer, you can install SA00-72-560M1-C fast.

Every time your goods arrive, we use this method to let you see your products intuitively, giving you peace of mind.

Contact us