< >

SA10-59-560M1-D

Brand: Haima

Model: S7

product name：Front Window Regulator Left

Part Number: SA10-59-560M1-D

Contact Now WhatsApp

Product Details

Product Intro:

Haima S7 Front Left Window Regulator (SA10-59-560M1-D)

1. Made Specifically for Haima S7 – Perfect Fit

Our SA10-59-560M1-D front left window regulator is an OEM-spec part designed just for the Haima S7 (2015-2017 models). It fits the car’s door structure and electrical connections like a glove – no extra modifications needed. You can just swap out your old one for this SA10-59-560M1-D directly, whether you use the car for daily commuting or off-roading. It works seamlessly with the original vehicle’s control system, so you never have to worry about compatibility issues.

2. Core Tech & Design: Practical and Durable

When it comes to the electric drive of the SA10-59-560M1-D, it’s super stable and reliable. It uses a high-efficiency permanent magnet motor paired with a gear drive system, delivering smooth lifting power. The noise is even below industry standards (≤40dB), so it won’t disturb your drive. Plus, the motor has built-in overheat protection – even if you use the window a lot, it won’t burn out easily, lasting way longer.

For protection against dust and water, it has double-layer rubber sealing rings. These keep out rain, dust, and small debris, preventing the motor and moving parts from rusting. It’s perfect for humid or dusty areas – lab tests show it still works 100% normally even in simulated heavy rain.

The materials are tough too, so it holds up well over time. The bracket and guide rail are stamped from cold-rolled steel, with electrophoretic coating and galvanization on the surface. It withstands salt spray tests for over 720 hours (the industry average is only 500 hours), so it’s great at resisting corrosion. The drive gear is made of wear-resistant engineering plastic – it can handle over 100,000 lifting cycles without breaking down.

SA10-59-560M1-D

Key Features of Haima S7 Front Left Window Regulator (SA10-59-560M1-D)

Made just for Haima S7 – swapping it out is a breezeFirst off, this SA10-59-560M1-D is an OEM part tailor-made for Haima S7 models from 2015 to 2017. It fits the door structure and electrical ports perfectly – no extra tweaks or mods needed at all! You just yank out the old regulator and pop this SA10-59-560M1-D right in, and it works totally smooth with the car’s original system. No “will it fit?” headaches here.

Quiet, steady electric drive – no annoying noiseThe SA10-59-560M1-D uses a solid permanent magnet motor with a gear drive system, so the window goes up and down super smoothly. And it’s quiet too – way under 40dB, which is below industry standards. No buzzing or rattling to bug you while driving! Plus, the motor has built-in overheat protection. Even if you use the window a ton (like rolling it up/down nonstop), it won’t burn out easily – lasts way longer.

Double protection against dust & water – handles tough conditionsThen there’s the dust and water part: it has double-layer rubber seals that block out rain, dust, and little bits of junk. That means the motor and moving parts won’t rust, even if you’re in humid areas or dusty spots. Lab tests even proved it works 100% fine in simulated heavy rain – this SA10-59-560M1-D can take some weather!

Tough materials, super durable – lasts foreverAnd finally, the SA10-59-560M1-D is built to hold up. The bracket and guide rail are made from cold-rolled steel, with electrophoretic coating and galvanization on top. It can handle over 720 hours of salt spray tests (the industry average is only 500 hours!), so it doesn’t rust easily. The drive gear’s made of wear-resistant plastic too – it can handle over 100,000 up-and-down cycles, no problem at all.

SA10-59-560M1-D

Haima S7 Front Left Window Regulator (SA10-59-560M1-D) Summary

To be honest, this SA10-59-560M1-D is literally made just for the Haima S7 (2015 to 2017 models)! Swapping it in is super easy—you just take out the old regulator, pop this one right in, and it fits the door structure and electrical ports perfectly. No random tweaks needed, and you never have to worry about it “not fitting” or “feeling wonky” when you use it.

It’s pretty nice to use too: the electric drive is steady, so the window goes up and down without shaking, and it’s quiet—under 40dB, so it never bugs you while you’re driving. The motor even has overheat protection, so even if you use the window a ton (like rolling it down at toll booths or waving at someone), it won’t burn out easily. It’ll last a good while.

Also, it’s really tough: the double rubber seals keep out rain and dust. Even if it’s pouring or you’re driving on a dusty road, the parts inside won’t rust—they’ll still work great. The materials are solid too: the bracket and guide rail are made of cold-rolled steel with a protective coating, and it can handle 720 hours of salt spray tests (way more than the industry average). The gear’s made of wear-resistant plastic, so it can handle 100,000 up-and-down cycles no problem.

All in all, this SA10-59-560M1-D is a reliable one—it’s easy to install, works smoothly, and holds up well. If you need to replace the window regulator on your Haima S7, this is a solid pick!

Our main thing is auto parts export, and we’ve got more than a decade of real, hands-on experience to back that up. Auto parts from any brand? We know ’em inside out—no random guesses, no half-baked estimates, just reliable know-how. Through the years, we’ve teamed up steady with clients in tons of countries, and we’ve earned a really strong rep in the market. Whether you’re looking to get parts for specific models or need a hand with logistics, we’re here for you—don’t hesitate to reach out anytime if you wanna know more or ask for tips!

SA10-59-560M1-D