This SA00-61-B82M1 is a factory-spec air conditioning blower motor tailor-made for Haima S7 series models! As the "core power source" of the air conditioning system, it directly determines how fast the car cools, ventilates, defrosts, and dehumidifies. Whether your original motor is broken and needs replacement, or you want to restore the AC performance, choosing SA00-61-B82M1 is a no-brainer—it’s perfectly compatible.
Mainly compatible with: 2010-2017 Haima S7, including 2013, 2015, and 2016 facelift models;
Compatible with: Haima 7 (the predecessor of S7), Haima S3, and other models with the same-spec air conditioning system. SA00-61-B82M1 offers factory-level compatibility for these models—no extra adapters needed;
Engine compatibility: Perfectly matches both 2.0L naturally aspirated and 1.8T turbocharged engine air conditioning systems. The electrical protocol is fully consistent with the original car, so no need to worry about incompatibility.
Voltage: 12V standard automotive power supply, can handle slight voltage fluctuations (±10% tolerance);
Power: 60-180W, automatically adapts to different vehicle configurations to meet both cooling and heating needs;
Rotational speed: 1280-1320 rpm, delivers steady air flow with noise below 45dB—just as quiet as the original;
Protection level: IP55, dustproof and splashproof, safe even in rainy days or muddy roads;
Heat resistance: Can withstand temperatures up to 130℃, reliable even in the hot engine compartment;
Service life: Equipped with double ball bearings, supports continuous operation for over 10,000 hours—much more durable than ordinary motors. Thanks to its solid bearing design, SA00-61-B82M1 rarely has faults during daily use.
SA00-61-B82M1 strictly follows Haima S7’s original factory design. Bolt holes, mounting interfaces are identical to the original. No wiring modifications, no drilling, no extra adapters required. Whether you’re a professional mechanic or a DIY enthusiast, you can replace it quickly and save a lot of time.
Equipped with a high-precision impeller and optimized design, it delivers uniform air flow. Even when the car is climbing hills, fully loaded, or the engine is under heavy load, SA00-61-B82M1 maintains stable air supply. Defrosting takes only 3-5 minutes in winter for clear visibility, and cooling speed in summer is just like a new car—super comfortable to ride in.
Housing: Die-cast aluminum alloy, lightweight (only 1.2kg), sturdy, and good heat dissipation—fearless of high temperatures in the engine compartment;
Sealing: Oil and corrosion resistant rubber gasket, prevents fluid leakage—a common problem with old motors;
Double ball bearings: Low friction, low noise, and no risk of seizing due to high temperatures. Can withstand extreme environments from -40℃ to 85℃.
Complies with national automotive air conditioning motor technical standards. Materials and craftsmanship undergo strict testing for peace of mind;
Installation location: Behind the passenger-side glove box—just remove the interior panel to access, no complex tools needed;
Daily maintenance: Simply clean the air conditioning filter regularly to reduce dust wear and extend the motor’s service life.
![SA00-61-B82M1]( "SA00-61-B82M1")
Key Features of Haima S7 Air Conditioning Motor SA00-61-B82M1
Fits Like Factory, Plug & Play: Made just for 2010-2017 Haima S7 (plus Haima 7/S3)! SA00-61-B82M1 lines up perfectly with original bolt holes, interfaces, and electrical setups—no need to mess with wires, drill holes, or grab extra adapters. Pros or DIYers can install it super easily!
Cools/Heats Fast & Steady: Comes with a high-precision impeller and smart design, so it blows consistent air. Even when the engine’s working hard (like climbing hills or fully loaded), SA00-61-B82M1 keeps airflow stable—defrosts in 3-5 mins winter, cools like a new car summer!
Tough as Nails, Built to Last: IP55 dust and splash resistant, die-cast aluminum housing (handles heat like a pro), and oil-resistant rubber sealing—no annoying leaks (a total pet peeve with old motors!). Double ball bearings let it run over 10,000 hours straight, and it handles extreme temps from -40℃ to 85℃!
Super Reliable, Low-Hassle Maintenance: Meets national auto AC motor standards, with steady 12V voltage (can handle ±10% fluctuations). It’s mounted behind the passenger glove box—super easy to reach! Just clean the AC filter now and then, no constant tinkering needed.
![SA00-61-B82M1]( "SA00-61-B82M1")
SA00-61-B82M1 is a no-fuss, perfect match for 2010-2017 Haima S7 (and Haima 7/S3)—plug it in and go, no wiring/drilling hassle! It cools/heats fast and steady (3-5 mins defrost, like-new cooling), stays tough through dust, splashes, and extreme temps (-40℃ to 85℃) with a 10k+ hour lifespan. Super reliable, meets national standards, and super easy to maintain—just clean the AC filter occasionally!
Hit us up—we’re your go-to in auto parts!Nearly 20 years in the game, super sharp on all quality components.Export pros here, with solid trust from global partners over the years.Drop us a line for inquiries—we’ll get back fast!
![SA00-61-B82M1]( "SA00-61-B82M1")
Contact us
![Need to know more? Hit us up with your inquiries!]( "Need to know more? Hit us up with your inquiries!")
