1.Check the part number first when choosing: When buying the airbag clock spring, tell the seller directly, “I need the 3438092 for Brilliance H330” – don’t pick the wrong model. If it’s not the 3438092, the airbag and horn might not work after installation, and you’ll just waste your money.
2.Match the malfunction symptoms: If your car’s airbag light is on, the horn doesn’t sound when pressed, or the steering wheel buttons don’t respond, nine times out of ten, there’s a problem with the 3438092. First, ask a mechanic to check if the circuit of the 3438092 is connected properly.
3.Don’t be careless with installation: When replacing the 3438092, make sure the mechanic straightens the steering wheel first before installing. The new 3438092 has a “centering mark” – if it’s installed crookedly, it’s easy to tear the internal flat cable, and you’ll have to replace it again later.
4.Original factory parts are more reliable: An aftermarket 3438092 might only cost around 100 yuan, but it’s not as durable as the original factory 3438092. The original 3438092 can withstand over 20,000 steering wheel rotations and also comes with a 1-year warranty. Don’t go for cheap options when it comes to safety.
5.Keep maintenance in mind regularly: Every time you drive 20,000 kilometers, ask the mechanic to check the 3438092 by the way and clean the dust on the connectors. Don’t wait until the 3438092 is completely broken to repair it – otherwise, you might run into trouble halfway.
![3438092]( "3438092")
Super Accurate Fit for the Car Model: It’s tailor-made specifically for the 2013-2017 Brilliance H330 models. This part number 3438092 is factory-designated, so it fits perfectly with the original steering column’s connectors and circuit setup. Unlike those universal parts that might look like they fit but end up making the airbag or horn useless—this one needs no extra modifications. Just pick it up, install it directly, and it works.
Super Solid Safety Protection:
It meets the strict ISO 26262 automotive functional safety standard. Some versions even have a dual-circuit design. Even if one circuit has poor contact, the backup one will still keep the airbag and horn working, cutting down on safety risks a lot;
The connectors are designed really thoughtfully: the airbag wire connectors look different from other circuit connectors. So when you’re doing repairs, you won’t plug them wrong. If you did plug them wrong, the airbag might deploy accidentally or stop working entirely—but with this design, you don’t have to worry about that.
Super Durable Build:
The core conductive parts inside use wear-resistant polyimide material, and the surface has an anti-oxidation treatment. The steering wheel can rotate more than 20,000 times without the core breaking easily—so it holds up well even with long-term use;
The outer shell is made of high-strength heat-resistant plastic. It can handle extreme cold (minus 40°C) in northern winters and extreme heat (80°C) in southern summers. It won’t deform from extreme temperatures, which means the circuit transmission won’t be affected.
Super Easy to Install: It’s pre-calibrated to the “middle position” before leaving the factory, and there are clear alignment marks. Mechanics don’t have to adjust it over and over—just straighten up the steering wheel, line it up with the marks, and install it. This way, you’re less likely to tug and damage the internal wires from misalignment, which means fewer reworks and saves time.
Handles a Lot of Jobs: It doesn’t just connect the airbag circuit—it also transmits signals for the horn and steering wheel buttons (like volume adjustment, Bluetooth connection). It’s like one part doing the work of several. That means fewer wires inside the steering column, so you won’t have problems from messy, tangled wires.
![3438092]( "3438092")
The Brilliance H330 airbag clock spring (Part No. 3438092) is a factory key part for 2013-2017 H330s. Its main job? Send steady signals to the airbag, horn, and steering wheel buttons (like volume or Bluetooth) when you turn the wheel—so those features don’t die on you.
It’s great because:
It fits your H330 perfectly. No extra fixes needed (unlike cheap universal parts that might not work).
It’s safe: meets ISO 26262 standards, some have backup circuits, and the connectors won’t plug wrong (no accidental airbag pops!).
It’s tough: handles over 20,000 wheel turns, works from -40°C to 80°C (good for hot summers or cold winters).
It’s easy to install: comes pre-aligned with marks, so mechanics don’t waste time adjusting. Also, it does multiple signal jobs, so fewer messy wires in the steering column.
All in all, it’s the part to get if you need a replacement—keeps your car safe and easy to use.
Hey there, friend! Our company’s core work is exporting auto parts for all kinds of car brands. We’ve stuck with this field for over 10 years—so we know the ins and outs like the back of our hand. All this time, we’ve delivered parts to numerous countries, teamed up with plenty of partners, and built a really reliable reputation. If you wanna know more, just shoot us a message!
