Chery X22 Pro Right Rear Air Exhaust Pipe Cover (Part No.: 602002539AA)
First, let’s keep it straightforward: the Chery X22 Pro Rear Air Exhaust Pipe Cover Right 602002539AA isn’t just a “decorative cap”—it’s your X22 Pro’s “right rear exhaust protector and style matcher.” Think of it as a tough, custom-fitted shield that covers the right side of the rear exhaust pipe. It guards the exhaust from scrapes (like hitting curbs), blocks road debris (small rocks, dirt) from getting stuck in the pipe, and blends with the X22 Pro’s rear design to keep the back end looking clean and factory-finished. Without it, the exhaust pipe could rust faster, get damaged by debris, or stick out awkwardly—ruining both function and looks.
This cover is exclusive to Chery X22 Pro models—always confirm with your car’s VIN or owner’s manual! It’s engineered to fit like it was built for the X22 Pro’s exhaust: its shape lines up perfectly with the exhaust pipe’s curve (no gaps), the mounting holes align exactly with the rear chassis (no drilling or modifying), and it’s made from heat-resistant material that handles the exhaust’s high temperatures (no warping or melting). Grab a generic cover? You’ll run into headaches: it’ll be too loose/tight (falls off or crushes the pipe), melt near hot exhaust (smells bad, risks fire), or clash with the X22 Pro’s rear styling. Total hassle for a part that needs to be both tough and sleek.
Don’t write it off as “just for looks”—it does 3 key jobs:
Protects the exhaust pipe: It takes the brunt of scrapes (e.g., backing over a small curb) and blocks debris from hitting the exhaust’s surface. This slows down rust (exhausts corrode easily from moisture and road salt) and prevents dents that could restrict airflow.
Keeps the rear end neat: It covers exposed exhaust components (like pipe joints or small brackets) that would otherwise look messy. It matches the X22 Pro’s original rear design—so the back of your car stays cohesive and polished.
Shields nearby parts: The exhaust gets hot while driving; this cover acts as a buffer, stopping heat from damaging nearby plastic parts (like the rear bumper) or burning anything that might brush against the pipe.
![602002539AA]( "602002539AA")
This 602002539AA cover is only for Chery X22 Pro models—using the wrong one is a waste and a risk:
You can install it in 15 minutes—just wait for the exhaust to cool down (it gets extremely hot!):
Prep the area: Make sure the exhaust is completely cool (wait 1–2 hours after driving). Wipe the right rear exhaust and mounting points with a damp cloth to remove dirt.
Line up the cover: Position 602002539AA over the right rear exhaust, matching the mounting holes/clips to the chassis.
Secure it: Attach the clips (push until they click) or tighten the bolts gently (don’t over-tighten—you could bend the cover). Test it by gently tugging—should stay in place.
Clean it with the car: Wipe the cover with soapy water when you wash your X22 Pro—removes road grime that can cause discoloration.
Check for looseness: Every few months, tug the cover gently to make sure it’s still secure (vibration can loosen clips over time).
Inspect for damage: If you hit a curb or large debris, check for cracks or dents—replace the cover if it’s damaged (a broken cover can’t protect the exhaust).
![602002539AA]( "602002539AA")
Exclusive to Chery X22 Pro (confirm via VIN, fits gas/hybrid trims), this cover acts as the right rear exhaust’s “protector and styler”: it shields the pipe from scrapes/debris (slowing rust, preventing dents), buffers exhaust heat to protect nearby parts, and keeps the rear end neat.
Made of heat-resistant stainless steel/high-temp plastic (no melting, rust-proof), it has secure mounting clips/bolts (no rattling, no drilling). DIY-installable in 15 minutes (wait for exhaust to cool). Maintain by washing and checking tightness. Aftermarket covers melt, misfit, or clash with styling—only the original ensures durability and cohesion.
Contact us
![602002539AA]( "602002539AA")
