T11-8202020

Chery Tiggo Right Side View Mirror (Part No.: T11-8202020)

1. First off, let’s break it down: the Chery Tiggo Right Side View Mirror T11-8202020 isn’t just a basic “mirror”—it’s a complete, factory-fitted assembly for your Tiggo’s right side (that’s the passenger side) that acts like your “second set of eyes” on the road. It’s not just glass in a plastic case: it comes with the mirror itself (either flat or anti-glare to cut night-time headlight glare), a tough outer housing, an adjustment setup (manual twist-knob or electric button, depending on your Tiggo’s trim), and a mounting base that bolts straight to the right front door. Some versions even have extra perks—like built-in turn signal lights or tiny heating wires (total lifesavers on rainy, foggy days when the mirror would otherwise fog up).
2. This right-side mirror is only for Chery Tiggo models built on the T11 platform—mostly the early-generation Tiggo 3 (2005–2012; always double-check your car’s VIN or owner’s manual to confirm it’s a T11!). It’s designed to fit like it was born with your Tiggo: the mounting holes line up perfectly with the pre-drilled spots on the right door, the housing curves to match the door’s shape (no weird gaps that let in wind or water), and if your car has electric mirrors or turn signals, this assembly plugs right into the existing wiring—no cutting, no splicing, no messy DIY fixes. Grab a generic mirror instead? You’ll end up with headaches: uneven gaps that rattle at high speeds, a mirror that won’t stay adjusted, or turn signals/heating that just don’t work. Total waste of time (and money).

3. Additional Features: May include heating elements to prevent fogging and icing.

Let me know if you want it expanded or tailored for a specific vehicle!

Installation & Maintenance (Easy—Even for DIY Newbies!)

Installation: Do It Yourself (Or Let Pros Help)

1. Take off the old mirror: Pop off the small plastic cover inside the right door (behind the mirror) to see the bolts. Unscrew the 2–3 bolts holding the old mirror, then disconnect the wiring (if it’s electric). Gently pull the old mirror off.

2. Line up the new one: Hold the T11-8202020 mirror against the door—make sure the mounting holes match. If it’s electric, plug the wiring connector in (it only fits one way, so no guesswork).

3. Secure it: Screw the bolts back in (don’t over-tighten—you’ll crack the plastic!), then pop the interior cover back on. Adjust the mirror to your seat position, and you’re done!

Maintenance: Keep It Working for Years

• Clean the glass weekly: Wipe it with a soft cloth and glass cleaner—bug splats or dirt build-up block your view. Avoid rough sponges (they scratch the anti-glare coating!).

• Check the adjustment: If the mirror wiggles or won’t stay in place, tighten the mounting bolts (loose bolts are common after bumpy roads).

• Fix small scratches: Use plastic polish on the housing to buff out light scratches. For deep ones? Grab touch-up paint that matches your Tiggo’s color (ask Chery for the paint code).

• Test heating/turn signals: In cold weather, turn on the mirror heat—if it doesn’t get warm in 1–2 minutes, the wiring might be loose. Check the turn signal monthly too—dim or dead LEDs are easy to replace with a small screwdriver.

Summary

The original T11-8202020 fits like a glove—it’s made with the same tough stuff as your Tiggo’s original factory parts, and it plays nice with every feature your car comes with. It’s not just some random mirror, y’know? It’s the peace of mind that comes with seeing clearly on the road, staying safe, and skipping those annoying last-minute fixes later down the line.

Contact us