First, let’s keep it clear: the
Chery Tiggo 7 Pro Tailgate (High Configuration) 552000038AADYJ isn’t just a “rear door for the trunk”—it’s your car’s “high-tech rear access hub” designed for convenience, safety, and comfort. Think of it as a precision-engineered, power-operated panel that seals the rear of the
Tiggo 7 Pro’s cargo area. Unlike basic manual tailgates, this high-config version adds smart features like electric opening/closing and hands-free operation, while still protecting the trunk from weather and impacts. Without it, accessing the trunk would be less convenient, and the cargo area would lack proper sealing or safety safeguards.
This high-config tailgate is
exclusively built for Chery Tiggo 7 Pro high-trim models—always confirm with your car’s VIN or owner’s manual! It’s tailored to fit perfectly: its shape matches the Tiggo 7 Pro’s rear body lines (no unsightly gaps), its electrical ports sync with the car’s system (powers electric functions), and its mounting points align with the rear frame (no forced installation). A generic or low-config tailgate? You’ll lose key features: it won’t have electric operation (manual lifting only), may leak rain, or fail to integrate with the car’s sensors—ruining the “high-end” experience.
Its value lies in “convenience + safety + functionality”—it does 4 key things for your Tiggo 7 Pro:
Smart, effortless access: It has power lift/lower (open/close with a button on the key fob, dashboard, or tailgate itself) and hands-free operation (wave your foot under the rear bumper to open, great when your hands are full with groceries or luggage).
Weather & noise protection: Multi-layer rubber seals around the edge block rain, snow, dust, and road noise. This keeps the trunk dry (no wet cargo) and quiet (no wind whistles at highway speeds).
Safety safeguards: A built-in anti-pinch sensor stops the tailgate mid-movement if it hits an obstacle (like a child’s hand or a bag), preventing injuries or damage. It also locks automatically when the car drives, securing the trunk.
Feature integration: It houses critical rear components: the high-mount brake light (boosts visibility to cars behind), the rearview camera (for reversing), and the license plate holder—all pre-fitted and calibrated to work with the Tiggo 7 Pro’s systems.
![552000038AADYJ]( "552000038AADYJ")
This 552000038AADYJ tailgate is only for Chery Tiggo 7 Pro high-trim models—wrong fit = lost functionality:
It involves electrical wiring and calibration—DIY mistakes break features or cause shorts:
Remove old tailgate: Techs disconnect the car’s battery, remove the old tailgate (if replacing), and disconnect any existing wiring (for camera/brake light).
Mount and wire: They bolt 552000038AADYJ to the rear frame, connect the electrical harness (for push rods, sensor, and camera), and sync the tailgate with the car’s system (calibrate anti-pinch and hands-free functions).
Test all features: They check power lift/lower, hands-free operation, anti-pinch, and auto-lock—ensuring every high-config feature works smoothly. They also test for leaks (using water sprays) to confirm sealing.
Clean the hands-free sensor weekly: Wipe the sensor under the bumper with a damp cloth (dirt or mud blocks detection—sensor won’t work).
Lubricate push rods every 6 months: Apply a small amount of silicone grease to the push rods (prevents rust and keeps movement smooth—dry rods squeak or slow down).
Inspect seals monthly: Check for cracked or loose rubber seals (replace if damaged—cracks cause leaks or noise).
Avoid slamming (even if manual override is used): Slamming damages the push rods and anti-pinch module (use the power button instead).
![552000038AADYJ]( "552000038AADYJ")
Exclusive to Chery Tiggo 7 Pro high-trim models (confirm via VIN), this tailgate is a “smart rear access hub”: it has electric/hand-free (foot-sensor) opening/closing (for hands-full convenience), anti-pinch + auto-lock (safety), and multi-layer seals (blocks rain/noise). It also integrates the high-mount brake light and rearview camera.
Made of rust-resistant high-strength steel with dual electric push rods, it fits perfectly. Professional installation (for electrical sync) is mandatory. Maintain by cleaning the foot sensor, lubricating push rods, and checking seals. Aftermarket versions fail at feature sync or sealing—only the original ensures convenience and safety.
Contact us
![552000038AADYJ]( "552000038AADYJ")
