First, let’s get clear—this isn’t the whole side mirror, just the “outer shell” that holds all the mirror parts together. It’s the hard, shaped frame mounted on your Tiggo7 Pro’s right front door, surrounding the mirror glass, turn signal (if your mirror has one), and internal adjustment motor. Think of it as the mirror’s “backbone”: its main jobs are to support those inner components so they work right, protect them from bumps (like brushing a parking curb) or weather (rain, dust), and match your car’s original look (same shape, color, and finish as the factory mirror). Without a solid frame, your mirror glass might rattle, the turn signal could break, or the whole mirror might feel loose.
This frame is made specifically for the Chery Tiggo7 Pro’s right side—double-check your VIN to be sure! It’s designed to fit like a factory part: its size lines up exactly with the right door’s mounting points (no gaps or overhang), it has cutouts for the mirror glass and turn signal (if equipped), and its color matches the Tiggo7 Pro’s body paint (no mismatched “off-tone” look). Grab a generic frame? You’ll run into issues: it won’t fit the door right (needs forcing), the holes won’t align with the mirror glass (glass sits crookedly), or the finish peels off in the sun—ruining your car’s appearance.
It’s more than just a “shell”—here are 3 key jobs it does for your Tiggo7 Pro:
Holds mirror parts in place: It has built-in slots and clips that secure the mirror glass, adjustment motor (the part that moves the glass up/down), and turn signal (if your mirror has one). No frame = those parts would shake loose or fall out.
Protects from damage: If you nudge a curb or a shopping cart with the right mirror, the frame takes the hit first. It’s tough enough to absorb small impacts, so the fragile glass or motor inside doesn’t break.
Keeps weather out: It has a tight seal where it attaches to the door and around the mirror glass. This stops rain, dust, or snow from getting inside the mirror housing—preventing rust on the motor or fogging behind the glass.
![601000518AA]( "601000518AA")
This 601000518AA frame only works for the Chery Tiggo7 Pro’s right side mirror—wrong fit = wasted money:
Fits These Models: All Chery Tiggo7 Pro variants (matches the right door’s mirror mount, mirror size, and turn signal placement—confirm via VIN). Works for both models with or without mirror turn signals (the frame has cutouts ready if needed).
Won’t Fit These:
Left side of the Tiggo7 Pro: Left mirror frames are mirror-image (reverse shape)—this right frame won’t align with the left door.
Other Chery models (e.g., S5, A13): Their mirror sizes and door mounts are different—frame won’t attach or hold parts.
Non-Chery vehicles: Even if it “looks close,” the mounting points and shape are wrong (can’t install without modifying the door).
Swapping the frame isn’t super hard, but you need to handle the mirror glass and motor gently:
Remove the old frame: Techs first pop off the mirror glass (carefully—don’t crack it), disconnect the turn signal/motor wires (if any), then unclip the old frame from the door mount.
Prep the new frame: They check the new frame’s weather seal (make sure it’s not damaged) and line up the cutouts with the mirror parts.
Mount and reassemble: They clip 601000518AA onto the door mount, reconnect the wires, and snap the mirror glass back into place. They test the mirror adjustment and turn signal to make sure everything works.
Clean regularly: Wipe the frame with a damp cloth (use car wash soap if dirty)—dirt or bird droppings can stain the finish.
Check the seal: Every few months, make sure the rubber weather seal isn’t cracked or loose (replace the frame if the seal fails—water will leak in).
Avoid hard impacts: Try not to hit curbs or objects with the mirror—even tough frames can crack if hit hard.
![601000518AA]( "601000518AA")
Exclusive to Chery Tiggo7 Pro’s right front door (confirm via VIN), this frame is the mirror’s “outer shell”—supporting mirror glass, turn signals (if equipped), and adjustment motors. It protects inner parts from impacts/weather and matches the car’s body color for a factory look.
It fits perfectly; generic frames crack easily, misalign with parts, or have mismatched colors. Maintain by cleaning regularly and checking the weather seal. Only the original ensures functional and aesthetic reliability.
Contact us
![601000518AA]( "601000518AA")
