First, let’s keep it clear—this isn’t just a “shock absorber” for any car. It’s the
right-hand (RH) front suspension’s “smooth ride core” , mounted between the Tiggo7 Pro’s right front wheel and the vehicle frame. Think of it as a buffer that takes the hit from rough roads: when you drive over potholes, speed bumps, or gravel, it soaks up the jolts so you don’t feel every bump in the cabin. Its main jobs? Keep the right front wheel pressed firmly to the road (for stable steering), stop the (body) from bouncing or swaying (especially when braking or turning), and protect other front suspension parts (like control arms) from excessive wear. Without it, your Tiggo7 Pro’s right front would rattle violently, steering would feel loose, and long drives would be unbearable.
This front shock absorber is
exclusively built for the Chery Tiggo7 Pro’s right front side—always confirm with your VIN to avoid mistakes! It’s tailored to fit and perform perfectly: its length and mounting points match the Tiggo7 Pro’s front suspension geometry (no forcing parts), its damping strength (how “soft” or “firm” it is) aligns with the car’s weight and handling (not too stiff, not too bouncy), and it works with the factory front
spring (no compatibility issues). Grab a generic RH shock? You’ll face problems: it’ll be too short/long (throws off wheel alignment), have wrong damping (causes body roll), or fail to attach to the frame (unsafe to drive).
It’s all about comfort and safety—here are 3 key things it does for your Tiggo7 Pro:
Absorbs road shocks: Inside the absorber, a piston moves through oil/gas to slow down the wheel’s up-and-down motion. This turns bumpy road energy into heat (which dissipates) instead of sending it to the cabin.
Stabilizes steering & braking: It keeps the right front wheel in contact with the road, even over bumps. This means no loose steering (you stay in control) and no uneven braking (the car stops straight).
Protects suspension parts: By cushioning impacts, it reduces stress on the right front control arm, ball joint, and wheel bearing. Without it, these parts wear out 2–3 times faster.
![202000359AA]( "202000359AA")
This 202000359AA shock absorber only works for the Chery Tiggo7 Pro’s right front (RH) side—wrong fit = unsafe suspension:
Installing this shock requires suspension alignment—DIY will ruin your Tiggo7 Pro’s handling:
Prep the vehicle: Techs lift the Tiggo7 Pro, remove the right front wheel, and disconnect the old shock from the frame and wheel hub.
Mount the new shock: They attach 202000359AA using torque wrenches (follows Chery’s exact specs—too loose = rattling; too tight = bushing damage), then reattach the front spring.
Align the suspension: They use a computerized alignment tool to adjust the right front wheel’s angle (critical for straight driving and even tire wear).
Test drive: They check for (rattles), uneven bouncing, or loose steering—ensuring the shock works smoothly.
Inspect for leaks monthly: Look for oil stains on the damping tube (leaks mean the shock is failing—replace immediately).
Listen for : If you hear clunks or squeaks from the right front over bumps, the mounting bushings are worn (needs replacement).
Replace every 80,000–100,000 km: Even if no leaks, damping strength fades over time (old shocks cause poor handling).
Avoid extreme impacts: Don’t hit deep potholes or curbs hard—this bends the damping tube (ruins the shock).
![202000359AA]( "202000359AA")
Exclusive to Chery Tiggo7 Pro’s right front (RH) side (confirm via VIN), this shock absorber mounts between the front wheel and frame. It absorbs road jolts (for a smooth ride), stabilizes steering/braking (keeps the wheel grounded), and protects suspension parts from wear.
It fits perfectly—generic ones have wrong damping (causes body roll) or mismatched mounts (ruins alignment). Maintain by checking for oil leaks monthly; replace every 80,000–100,000 km. Only the original ensures safe handling and ride comfort.
Contact us
![202000359AA]( "202000359AA")
