Chery Tiggo 7 Pro Front Hub (Part No.: 204000455AA)
First, let’s break it down simply: the
Chery Tiggo 7 Pro Front Hub 204000455AA isn’t just a “metal disc”—it’s your front wheel’s “central support and rotation core.” Think of it as a tough, precision-machined component bolted to the
Tiggo 7 Pro’s front suspension. It’s where the front wheel attaches, holding the wheel’s weight while letting it spin smoothly. More than that, it connects the wheel to the steering system and suspension—so when you turn the wheel or hit a bump, the hub ensures the wheel moves in sync with your input and the road. Without a working hub, your front wheel would wobble, steer poorly, or even seize up mid-drive.
This front hub is exclusively designed for Chery Tiggo 7 Pro front wheels—always confirm with your car’s VIN or owner’s manual! It’s engineered to match the Tiggo 7 Pro’s specs perfectly: its size fits the front wheel’s mounting holes (no forced fitting), its built-in bearing handles the car’s weight (no premature wear), and its flange aligns with the suspension arms (keeps steering tight). A generic hub? You’ll face headaches: it’ll be too loose (causing wheel wobble), too small (won’t attach to the wheel), or have weak bearings (fails fast)—risking safety and costly repairs.
Core Jobs: Why This Hub Keeps Your Front Wheels Working
Its role is make-or-break for front-end performance—it does 4 critical things for your Tiggo 7 Pro:
Supporting the weight of the car: It bears the weight of the front half of the Tiger 7 Pro, transferring the weight from the suspension to the wheels (so that the wheels can remain grounded, even on bumpy terrain).
Make the wheels rotate smoothly: The hub has an inbuilt bearing that allows the wheels to rotate freely with minimal friction, no grinding or stiff movement, even at high speeds.
The connection between steering and suspension: It links the front wheels to the bogie (so turning the wheels moves the hub/wheel) and the suspension (so the hub absorbs bumps and keeps the ride smooth).
Keep the wheels aligned: It keeps the front wheels at the correct Angle (toe, arc) - preventing uneven tire wear and ensuring the car travels in a straight line (without the need to constantly adjust the steering).
![204000455AA]( "204000455AA")
This 204000455AA front hub is only for Chery Tiggo 7 Pro front wheels—wrong fit = front-end failure:
This isn’t a DIY part—mistakes ruin steering or cause wheel failure:
Remove old hub: Techs take off the front wheel, disconnect the suspension/steering links, and press out the old hub (careful not to damage the suspension).
Install new hub: They press the 204000455AA hub into place, bolt it to the suspension/steering, and torque all bolts to Chery’s specs (too loose = play; too tight = damage).
Align and test: They perform a front-end alignment (critical to keep wheels straight) and test-drive to check for wobble, noise, or loose steering.
Check the dust cover monthly: Look for cracks or tears—if damaged, replace it fast (dirt will ruin the bearing in weeks).
Listen for bearing noise: If you hear a grinding/humming sound from the front wheel (worse at high speeds), the hub’s bearing is worn—get the hub replaced.
Avoid potholes when possible: Hard hits on potholes bend the hub’s flange or damage the bearing—shortening its life.
![204000455AA]( "204000455AA")
Exclusive to Chery Tiggo 7 Pro’s front wheels (confirm via VIN), this hub is the front wheel’s “support & rotation core”: it bears the car’s front weight, enables smooth wheel spin via an integrated bearing, links the wheel to steering/suspension, and maintains wheel alignment (prevents uneven tire wear).
It has a sealed bearing (dust/water-proof, low friction), high-strength steel flange (secure wheel mounting), and rubber dust cover. Professional installation (with front-end alignment) is mandatory. Maintain by checking the dust cover and listening for bearing hum. Aftermarket hubs have weak bearings or poor fit—only the original ensures safety and durability.
Contact us
![204000455AA]( "204000455AA")
