First, let’s clarify its core role: the
Chery Tiggo7 Pro Center Brake Light 605000397AA isn’t just a “third brake light”—it’s a
high-mount safety warning device designed to reduce rear-end collisions. Mounted at the top of the Tiggo7 Pro’s rear windshield or trunk lid (higher than the left/
right rear brake lights), it acts as a clear, eye-level signal for vehicles behind. Its main job? To light up instantly when you press the brake pedal, giving rear drivers an extra, unobstructed warning to slow down—critical in heavy traffic, rain, or fog when standard brake lights might be hidden or hard to spot.
This center brake light is exclusively built for the Chery Tiggo7 Pro—always confirm with your vehicle’s VIN! It’s tailored to fit and function perfectly: its size/shape matches the Tiggo7 Pro’s rear upper panel (no gaps or awkward protrusions), its LED brightness aligns with Chery’s safety standards (visible from 100+ meters), and its wiring harness plugs directly into the factory electrical system (no cutting or adapters). A generic light? You’ll face issues: it’ll be too dim (hard to see), won’t fit the mounting spot (needs drilling), or has mismatched wiring (fails to light up)—undermining safety.
Core work: Enhance rear safety and visibility
Its function is to ensure the safety of you and other drivers. Here are the three key tasks it performs for your Tiggo7 Pro:
Additional brake warning: Stay at a high position to avoid being blocked by other vehicles (for example, in stop-and-go traffic) or weather conditions (rain or snow hitting the rear window). The driver behind noticed that it was faster than the standard brake light, giving them more time to react.
Instant response: It uses LED bulbs and lights up within a few milliseconds (faster than the old incandescent bulbs). This momentary lead can help the drivers behind brake more quickly, thereby reducing the risk of collision.
Weather resistance visibility: Its bright and focused LED lights can penetrate fog, rain or dusk. Unlike dimmable bulbs, it remains visible even in low light conditions, so drivers behind will never miss your brake signal.
![605000397AA]( "605000397AA")
This 605000397AA center brake light is only for the Chery Tiggo7 Pro—wrong fit = safety gaps:
Unlike complex parts, this light is simple to install—just follow these steps:
Access the old light: Open the rear trunk (or remove a small trim panel inside the rear) to reach the back of the center brake light.
Unplug and remove: Disconnect the old light’s wiring harness, then pop off the mounting clips (no tools needed) to take out the old unit.
Install the new one: Line up 605000397AA with the mounting spot, press it into place (clips will lock), then plug in the wiring harness.
Test it: Press the brake pedal (have someone check from behind) to confirm the light turns on—done!
Clean the lens monthly: Wipe the light’s outer lens with a damp cloth (remove dust, bugs, or road grime—dimmed light is hard to see).
Check wiring yearly: Make sure the harness is plugged in tight (vibration can loosen it—no light means no warning).
Replace if dim/broken: If LEDs fade or the housing cracks (lets water in), replace it immediately—don’t drive with a non-working center brake light
![605000397AA]( "605000397AA")
Exclusive to Chery Tiggo7 Pro (confirm via VIN), this high-mount safety light (on rear windshield/trunk lid) reduces rear-end collisions. It lights up instantly with LEDs (faster than incandescents) when braking, offering unobstructed warnings to rear drivers—visible even in rain/fog, unlike standard brake lights.
It fits perfectly (no gaps, plug-and-play wiring); generic lights are dim, ill-fitting, or fail to work. Install easily (DIY-friendly) and maintain by cleaning the lens monthly—replace if dim/cracked. Only the original ensures reliable rear safety warnings.
Contact us
![605000397AA]( "605000397AA")
