First, let’s keep it simple: the
Chery FX Rear Tail Lamp (Out Right) 605000723AA isn’t just a “back-end light”—it’s your car’s “right-rear safety signal hub.” Think of it as a compact, all-in-one light unit mounted on the Chery FX’s right rear corner (the “Out Right” means it’s the outer, visible lamp on the right
rear bumper/body). Its job? To send clear signals to drivers behind you—whether you’re braking, turning right, reversing, or just parked at night. Without it, other cars won’t know your next move, raising the risk of rear-end crashes or collisions while reversing.
This tail lamp is exclusively designed for the right rear (outer) of Chery FX models—always confirm with your car’s VIN or owner’s manual! It’s engineered to fit the FX perfectly: its shape matches the car’s rear body lines (no gaps or clunky fits), its light angles meet safety standards (signals are visible from far away, even in rain), and its wiring plug syncs with the FX’s electrical system (no “check light” errors or short circuits). A generic tail lamp? You’ll run into headaches: it’ll look mismatched, have dim or misaligned signals, or fail to connect to your car’s wiring—making your drives less safe and even breaking traffic laws.
It’s not just one light—it’s 4 safety signals in one, all critical for your Chery FX:
Brake Light: Shines bright red when you press the brake pedal. Tells drivers behind you to slow down (the most important signal for avoiding rear-end crashes).
Right Turn Signal: Blinks amber when you flip the right turn lever. Warns cars, cyclists, and pedestrians that you’re turning right—preventing side collisions at intersections.
Reverse Light: Turns on white when you shift into reverse. Illuminates the area behind your FX (so you can see curbs, toys, or small obstacles) and tells others you’re backing up.
Tail / Lamp (Parking Lamp): Glows dim red when you turn on your car’s parking lights or low beams. Makes your FX visible at night or in fog—so drivers know your car’s width and position, even when you’re not moving.
![605000723AA]( "605000723AA")
This 605000723AA tail lamp is only for the right rear (outer) of Chery FX models—wrong fit = safety risks or damage:
It’s easier than headlamps—just follow these steps:
Access the old lamp: Open the FX’s rear trunk, remove the small access panel behind the right rear lamp, and disconnect the wiring plug.
Remove and replace: Unbolt the old lamp from the rear body, line up 605000723AA with the mounting holes, secure it with bolts, and plug in the wiring.
Test all signals: Have someone press the brakes, flip the right turn signal, and shift into reverse—make sure every light works (no dim or dead signals).
Clean the lens weekly: Wipe the lamp’s plastic cover with a damp cloth to remove dirt, bug splats, or road grime (dirty lenses make signals hard to see).
Check for leaks monthly: Look for fogging inside the lamp (a sign of broken seals)—fix it fast to avoid bulb/wiring damage.
Replace bulbs with Chery-approved ones: If a bulb burns out, use only OEM or Chery-recommended bulbs (generic bulbs may overheat and melt the housing).
![605000723AA]( "605000723AA")
Exclusive to the right rear outer side of Chery FX (confirm via VIN), this tail lamp acts as a “rear safety signal hub”: it integrates 4 functions—bright red brake light, blinking amber right turn signal, white reverse light, and dim red parking/tail light—to alert drivers behind, preventing rear-end or reverse collisions.
Made with a sealed ABS housing (rain/dirt-proof), long-life LED/halogen bulbs, and a custom wiring harness (no shorts), it fits the FX’s rear body perfectly. DIY-installable (test signals post-setup); maintain by weekly lens cleaning and checking for leaks. Aftermarket lamps have dim signals, leak, or misfit—only the original ensures safety and legality.
![605000723AA]( "605000723AA")
Contact us
![605000723AA]( "605000723AA")
