403004382AADQJ
Product Details
Chery FX Left Front Outer Handle – Part No.: 403004382AADQJ
Let’s keep it simple—this isn’t just a “plastic or metal lever” on your Chery FX’s door. It’s the everyday access point for the driver to get in and out of the car safely: a durable, weather-resistant unit made of high-strength ABS plastic (or metal alloy in some variants) with a smooth grip surface, built-in connection to the door lock mechanism, and a rubber seal around its base. Mounted on the outer panel of the Chery FX’s left front door—right at arm’s length for the driver—it works with the door lock (mechanical or electronic) to unlock and open the door with a simple pull. Without it, you’d struggle to access the driver’s seat, and a broken handle could leave you locked out or unable to close the door securely.
This left front outer handle is exclusive to Chery FX—always check your vehicle’s VIN to confirm fitment! It’s tailored to the FX’s left front door specs: its shape matches the door’s outer curve (blends seamlessly for a neat look), its internal connection aligns with the FX’s door lock cable or electronic actuator (no stuck or loose pulls), and its rubber seal fits the door’s panel gaps (stops rainwater from seeping into the door interior). Grab a generic handle or one for other models? You’ll run into trouble: wrong shape (sticks out awkwardly or doesn’t fit the door), weak connection (breaks when pulling), or poor sealing (water gets inside the door and damages wiring).
Core Jobs: Enable Easy Access, Ensure Safety & Block Weather
As a daily-use part of the FX’s door system, it does three key jobs to make every trip smoother:
Simplify driver entry/exit: A gentle pull on the handle triggers the door lock (mechanical cable tugs the lock, or electronic signal unlocks it) and releases the door latch—letting you open the door with minimal effort. It’s positioned to fit most drivers’ arm lengths, so you don’t have to stretch or strain.
Secure the door when closed: When the door is shut, the handle’s internal mechanism locks into place—preventing the door from popping open accidentally while driving. It also works with the FX’s central locking system (if equipped): locking the car via remote or inside button disables the handle’s unlock function, deterring theft.
Keep rain/dust out of the door: The rubber seal around the handle’s base presses tightly against the door panel. This blocks rainwater, road dust, or snow from getting into the door’s interior (where wires, window regulators, and latch parts are)—avoiding rust, short circuits, or stuck window mechanisms
This 403004382AADQJ left front outer handle only fits Chery FX—wrong fit means useless or unsafe access:
Fits These: All Chery FX variants (matches left front door curve, lock mechanism type, and panel gap size—confirm with VIN).
Won’t Fit These:
Non-Chery vehicles: Even if the shape looks similar, their door lock cables/actuators and panel gaps differ (no functional fit; may break the door lock).
FX with modified left front doors: Aftermarket custom doors or door panels change the handle’s mounting position—original handle won’t align (can’t open/close the door).
Installation & Upkeep (Pros Recommended—Door Interior Matters!)
Installation: Best Done by Certified Technicians
Replacing this handle involves accessing the door’s interior—DIY risks damaging wires or window parts:
Prep: Techs remove the left front door’s inner panel (carefully, to avoid breaking plastic clips), disconnect any electrical connectors (if the handle is electronic), and locate the handle’s mounting bolts.
Remove old handle: They unbolt the old handle from the door’s outer panel, disconnect the internal cable or electronic connector, and pull the old handle out from the outside.
Install new handle: They feed 403004382AADQJ into the door’s outer opening, bolt it in place, reconnect the cable/connector, and test the pull (ensures it unlocks and opens the door smoothly).
Reassemble & seal: They put the inner door panel back on, press the rubber seal around the handle’s base to ensure tightness, and test the door again (checks for water leaks and secure closing).
Maintenance: Easy Checks for Daily Reliability
Clean the grip monthly: Wipe the handle’s surface with a damp cloth and mild soap—removes dirt, oil, or bird droppings (prevents slipping and keeps it looking neat).
Check for loose pulls: If the handle feels “wobbly” or doesn’t unlock the door on the first pull, have it checked—loose cables or worn connectors need tightening/replacing.
Inspect the rubber seal: Look for cracks or missing pieces in the seal—replace it if damaged (stops water from getting into the door).
Avoid forced pulls: If the door is stuck (e.g., frozen in winter), don’t yank the handle hard—this breaks the internal cable. Warm the door first (with a hairdryer or de-icer) before trying to open it.
Summary: Chery FX Left Front Outer Handle (403004382AADQJ)
Contact us
Leave your messages
