Let’s get straight to it—this isn’t just a “metal disc” on your Chery FX’s front wheels. It’s the
front braking system’s “core friction component”: a high-strength cast iron disc (often with a ventilated design) mounted directly to the
front wheel hub of the Chery FX. Working in tandem with front brake pads, it’s the key part that converts the vehicle’s kinetic energy into heat to slow or stop the car. Think of it as the “braking friction surface”—when you press the brake pedal, brake pads clamp down on this disc, and the resulting friction generates stopping force. Without it, the front brakes lose their ability to function, making the vehicle nearly impossible to control during deceleration.
This front wheel brake disc is exclusively engineered for the Chery FX—always confirm your vehicle’s VIN to ensure a perfect match! It’s tailored to the FX’s front braking system specs: its diameter, thickness, and mounting hole pattern align with the FX’s front wheel hub (secure installation), its friction surface hardness matches the factory brake pads (even wear), and its ventilated structure (if applicable) syncs with the FX’s braking heat dissipation needs (prevents overheating). Opt for a generic brake disc? You’ll face safety risks: insufficient friction (longer braking distance), poor heat resistance (brake fade during heavy use), or mismatched size (causes vibration and noise).
As a critical safety component, it bears the brunt of front braking force—here are 3 key roles for your Chery FX:
Generate stopping force: It provides a smooth, high-friction surface for brake pads to clamp onto. The friction between the disc and pads slows the front wheel rotation, directly reducing the vehicle’s speed until it stops.
Dissipate braking heat: Braking generates massive heat (up to hundreds of degrees Celsius). The disc’s design—often with ventilated fins or solid structure optimized for heat transfer—quickly dissipates this heat to avoid “brake fade” (loss of braking efficiency due to overheating).
Ensure braking stability: Its precise machining (flat, smooth friction surface and balanced weight) prevents vibration or judder when braking. This keeps the steering wheel steady and the vehicle on track during emergency stops or heavy braking.
![T15-3501075]( "T15-3501075")
This T15-3501075 front wheel brake disc only works for the Chery FX—wrong fit = severe braking risks:
Replacing front brake discs involves critical safety adjustments—DIY is extremely risky:
Prep the vehicle: Techs lift the front of the FX, remove the front wheels, and disconnect the front brake calipers (to access the old discs).
Remove old discs: They unbolt the old discs from the wheel hubs, checking for hub surface rust (cleaning it to ensure new disc fit).
Install new discs: They mount T15-3501075 onto the hubs, torque the bolts to Chery’s exact specs (too loose = disc wobble; too tight = cracking), then reattach the calipers with new brake pads (recommended to replace pads with discs).
Test & break-in: They bleed the brake system (remove air bubbles), test brake pedal feel, and guide a 200–300km break-in (avoid hard braking) to seat the discs and pads properly.
Check thickness regularly: Every 10,000km, have techs measure the disc thickness. Replace it if it’s below Chery’s minimum limit (usually 2–3mm less than the original thickness).
Inspect for wear & damage: Look for uneven wear (scoring, grooves), cracks, or warping. These issues cause vibration, noise, or reduced braking performance—replace the disc immediately.
Avoid overheating: Don’t ride the brakes (keep feet off the pedal when not braking) or perform repeated hard braking (e.g., downhill without gear control)—this causes permanent disc damage.
Keep friction surface clean: Avoid oil or grease contamination (from leaking wheel bearings or CV joints). Contaminated discs lose friction—clean with brake cleaner or replace if heavily soiled.
![T15-3501075]( "T15-3501075")
Exclusive to all Chery FX variants (confirm via VIN), this is a high-strength cast iron
front brake disc. It works with brake pads to generate stopping force, dissipates braking heat to prevent fade, and ensures stable braking via its precise-machined surface.
It won’t fit other Chery models, non-Chery vehicles, or FX with modified front hubs. Install by certified techs; maintain by checking thickness/wear regularly and avoiding overheating. Only the original guarantees safety and reliable braking performance.
Contact us
![T15-3501075]( "T15-3501075")
