553000312AADYJ
Product Details
Chery FX Left Front Fender (Part No.: 553000312AADYJ)
First, let’s keep it simple: the Chery FX Left Front Fender 553000312AADYJ isn’t just a “metal panel”—it’s your FX’s “left-side body shield and style matcher.” Think of it as the tough, custom-fitted piece that covers the left front wheel well and connects the FX’s front bumper, headlamp, and front door. It shields the car’s inner parts from road debris (like rocks or mud), keeps the front end looking sleek, and ensures all nearby parts fit together perfectly. Without it, your FX’s left front would be exposed to damage, look messy, and risk water getting into the wheel well.
This fender is exclusively for Chery FX models—always confirm with your car’s VIN or owner’s manual! It’s engineered to fit the FX’s front end like it was made for it: its curves match the FX’s original body lines (no weird gaps), the mounting holes align exactly with the chassis and adjacent parts (no drilling), and it has pre-cut notches for the left front headlamp, bumper, and door (so those parts snap right into place). Grab a generic fender? You’ll run into headaches: it’ll sit crookedly (ruins the front look), rust fast (cheap metal), or block the headlamp/door (making them hard to use). Total hassle for a part that protects and styles your FX.
Core Jobs: Why This Fender Matters for Your FX
Don’t underestimate its role—it does 3 key things:
Shields from road damage: It blocks rocks, gravel, and mud kicked up by the left front wheel from hitting the FX’s body, frame, or wiring. This prevents dents, scratches, and rust on vulnerable inner parts.
Keeps the front end looking factory-fresh: It matches the FX’s original body shape and contour. If your old fender is dented or rusted, replacing it with 553000312AADYJ makes the front end look like new again.
Holds other front parts in place: It has built-in mounting spots for the left front headlamp, front bumper, and even the side mirror (on some trims). Without it, these parts might shift, rattle, or not fit at all.
This 553000312AADYJ fender is only for Chery FX models—using the wrong one wastes money:
Fits These Models: All Chery FX variants (confirm via VIN—trims may use steel/plastic, but the shape and mounting points are the same).
Won’t Fit These:
Other Chery models (e.g., Tiggo 7 Pro, Arrizo 6): Their front ends are wider/narrower, so the fender won’t align with the bumper or door.
Non-Chery vehicles: Even if it “looks close,” the mounting holes and body curves are wrong—installing it will make the front end lopsided.
Installation & Maintenance (Best Left to Pros—Alignment Matters!)
Installation: Professional Help Recommended
While it’s possible to DIY, aligning the fender perfectly is tricky—pros do it best:
Remove the old fender: They’ll take off the left front headlamp, bumper, and door trim to access the old fender, then unscrew it from the chassis.
Prep the new fender: If it’s unpainted (some come as primer-only), they’ll paint it to match your FX’s color.
Install and align: They’ll attach 553000312AADYJ, adjust it to sit flush with the door/bumper/headlamp, then reattach all nearby parts.
Maintenance: Keep It Looking Good
Wash with the car: Clean the fender when you wash your FX—road salt and mud build up and cause rust (especially on steel fenders).
Check for dents/scratches: Fix small dents with a paintless dent repair kit; touch up scratches with matching paint to stop rust.
Inspect seals yearly: If the edge seals crack, replace them (cheap parts) to keep water out
Summary: Chery FX Left Front Fender (553000312AADYJ)
Contact us
Leave your messages
