SX5G-1001130

Model: FMC SX5

Product Name： SX5 Engine Cushion

Part Number: SX5G-1001130

Contact Now WhatsApp

Product Details

Dongfeng FMC SX5 Engine Cushion – Part No.: SX5G-1001130

Let’s cut to the chase—this isn’t just a “rubber pad” under your Dongfeng FMC SX5’s engine. It’s the key shock-absorbing and load-bearing part between the engine and vehicle frame: a durable, precision-made component usually made of rubber-metal composite (tough rubber core with embedded metal plates). Mounted at specific points between the SX5’s engine block and the chassis frame, it acts like a “flexible buffer” for the engine. Think of it as the “engine’s shock absorber”—without it, the engine’s vibrations would shake the whole car, cause loud noises inside, and even damage hoses or wires connected to the engine.

This engine cushion is made exclusively for Dongfeng FMC SX5—always check your vehicle’s VIN to confirm it fits! It’s tailored to the SX5’s specs: its thickness and rubber hardness match the engine’s weight (so it doesn’t flatten or break under load), its mounting holes line up perfectly with the SX5’s engine and frame (no forced adjustments), and its flexibility syncs with the engine’s vibration frequency (maximizing shock absorption). Grab a generic cushion instead? You’ll run into trouble: wrong size (can’t install), too soft/too hard rubber (bad ), or weak metal parts (rips apart over time).

1. Core Jobs: Shock Absorb, Support & Protect

As a must-have for your SX5’s engine system, it does three big jobs that keep driving smooth and the engine safe:

Cut down engine vibrations: When the SX5’s engine runs, it creates constant vibrations. The cushion’s rubber core deforms gently to absorb these shakes, stopping them from spreading to the chassis and car body—this means less noise inside the cabin and a smoother ride.

Support the engine’s weight: The engine is one of the heaviest parts of the car (usually 100–150kg for the SX5). The cushion bears this weight steadily, keeping the engine in its correct position (no sagging or shifting while driving over bumps).

Protect engine parts & hoses: By cushioning the engine, it prevents hard jolts from damaging delicate parts like fuel lines, coolant hoses, or electrical connectors. It also compensates for tiny movements between the engine and frame (from heating/cooling or driving) so parts don’t get pulled or twisted.

This SX5G-1001130 engine cushion only fits Dongfeng FMC SX5—wrong fit means it’s useless:

Fits These: All Dongfeng FMC SX5 variants (matches the engine model, frame mounting points, and weight requirements—confirm with your VIN).

Won’t Fit These:

Other Dongfeng models: Like Dongfeng H30 or AX7—different engine weights and frame designs (cushion can’t support or align parts).

Non-Dongfeng vehicles: Even if it looks similar, the engine/frame bolt patterns and vibration needs are way off (can’t install or work).

SX5 with modified engines: Aftermarket engines have different weights or mounting points—original cushion can’t adapt.

Installation & Upkeep (Leave It to Pros!)

Installation: Must Be Done by Certified Techs

Swapping this cushion isn’t a DIY job—misalignment risks engine damage:

Prep: Techs lift the SX5 safely, use a jack to support the engine (so it doesn’t drop), then remove the bolts holding the old cushion to the engine and frame.

Remove old cushion: They take out the worn cushion, clean the mounting surfaces (remove oil or rust), and check if the engine/frame has damage.

Install new cushion: They line up SX5G-1001130 with the mounting holes, bolt it to Dongfeng’s exact torque specs (too tight crushes the rubber; too loose it shifts), then lower the engine gently onto the new cushion.

Test: They start the engine to check for less vibration, then test drive to ensure no abnormal noises or engine movement.

Maintenance: Easy Checks to Keep It Working

Look for rubber damage: Every 30,000km, check if the rubber is cracked, hardened, or leaking (old rubber loses shock absorption). Replace it fast if you see this.

Tighten bolts: Have techs check the cushion’s bolts during oil changes—loose bolts cause the engine to rattle or shift.

Keep oil away: Engine oil or gear oil eats away at rubber—wipe up any leaks near the cushion immediately.

Watch for warning signs: If you feel more vibration in the steering wheel or hear loud engine noise inside, the cushion is probably worn out.

Company Introduction

Established in 2011 and headquartered in Jinan, China, Shandong Victory Car Parts Technology Co., Ltd. has built a strong reputation as a dependable and esteemed leader in the automotive spare parts industry. We are dedicated to offering a wide array of high-quality, precision-engineered components that comply with the stringent performance requirements of China’s top automobile manufacturers. Our extensive product portfolio caters to numerous vehicle models from well-known brands such as Chery, Lifan, Brilliance, JAC, Changan, Dongfeng, MG, Geely, Great Wall, Zotye, Haima, BAIC, FAW, BYD, and many more.

SX5G-1001130